|
||||||||||||
 | Hovering will show thumbnail Pop-Up Clicking will show section. |
| Hovering will show thumbnail Pop-Up Clicking will show section. |
|
Pricing applies to Internet orders only!!! Numbers shown are quantities used per assembly. Prices are based on a quantity of one (Each). Order the quantities needed for repair. |
| ORDER QTY |
REF. NO. |
PART NO. / DESCRIPTION | SALE PRICE |
PRICE EACH |
PC800 REQ |
| 1 | 17404-PD6-003 CLAMP, BYPASS HOSE |
0.00 | 0.00 | 1 | |
| 2 | 19601-MR5-000 COVER, ENGINE HEAT |
0.00 | 0.00 | 1 | |
| 3 | 19602-MR5-000 PLATE, RIGHT ENGINE HEAT |
47.79 | 50.31 | 1 | |
| 4 | 19603-MR5-000 PLATE, LEFT ENGINE HEAT |
47.79 | 50.31 | 1 | |
| 5 | 19612-MR5-000 PATCH, ENGINE HEAT COVER (A) |
0.00 | 0.00 | 2 | |
| 6 | 19613-MR5-000 PATCH, ENGINE HEAT COVER (B) |
0.00 | 0.00 | 1 | |
| 7 | 19616-MR5-000 PLATE, AIR GUIDE |
0.00 | 0.00 | 1 | |
| 8 | 19631-MR5-000 RUBBER, RIGHT WIND GURAD |
0.00 | 0.00 | 1 | |
| 9 | 19632-MR5-000 RUBBER, LEFT WIND GUARD |
0.00 | 0.00 | 1 | |
| 10 | 33613-KG1-610 COLLAR, TURN SIGNAL SETTING |
0.00 | 0.00 | 1 | |
| 11 | 50100-MR5-871 FRAME COMP. (EXCEPT CALIF) |
0.00 | 0.00 | 1 | |
| 11 | 50100-MR5-891 FRAME COMP. (CALI ONLY) |
0.00 | 0.00 | 1 | |
| 12 | 50201-KE5-000 RUBBER, FRONT THRUST MOUNTING |
0.00 | 0.00 | 8 | |
| 13 | 50210-MR5-000 SUB-FRAME COMP. |
304.35 | 320.37 | 1 | |
| 14 | 50251-MR5-000 COLLAR, ENGINE SETTING (A) |
16.36 | 17.22 | 1 | |
| 15 | 50252-MR5-000 COLLAR, ENGINE MOUNT (B) |
0.00 | 0.00 | 1 | |
| 16 | 50253-MR5-000 COLLAR, ENGINE MOUNT (C) |
10.12 | 10.65 | 1 | |
| 17 | 50257-MR5-000 COLLAR, ENGINE MOUNT (D) |
8.00 | 8.42 | 1 | |
| 18 | 50258-MR5-870 BRACKET COMP., ENGINE MOUNTING |
33.88 | 35.66 | 1 | |
| 19 | 50260-MR5-000 RUBBER, ENGINE MOUNTING (E) |
24.27 | 25.55 | 1 | |
| 20 | 64206-MR5-000 BUMPER, RIGHT FRONT |
0.00 | 0.00 | 1 | |
| 20 | 64206-MR5-790 BUMPER, RIGHT FRONT |
0.00 | 0.00 | 1 | |
| 21 | 64216-MR5-000 BUMPER, LEFT FRONT |
0.00 | 0.00 | 1 | |
| 22 | 74813-MR5-000 STRIKER, TAILGATE |
0.00 | 0.00 | 1 | |
| 23 | 81363-MR5-000 RUBBER G, SEAL |
6.03 | 6.35 | 1 | |
| 24 | 83523-MR5-870 RUBBER, COVER SETTING (LOWER) |
3.38 | 3.56 | 2 | |
| 25 | 90003-GC3-000 BOLT, REAR FENDER |
0.00 | 0.00 | 3 | |
| 26 | 90029-888-000 BOLT, FLANGE (6X16) |
2.68 | 2.82 | 4 | |
| 27 | 90103-GA6-000 BOLT, ENGINE HANGER (10X153) |
0.00 | 0.00 | 1 | |
| 28 | 90109-SB6-000 SCREW, TRUSS (5X16) |
5.39 | 5.67 | 3 | |
| 29 | 90153-MR5-000 BOLT, ENGINE HANGER (10X282) |
0.00 | 0.00 | 2 | |
| 30 | 90157-MN8-000 BOLT, SOCKET (10X17) |
0.00 | 0.00 | 2 | |
| 31 | 90320-GC3-000 NUT, SPRING (5MM) |
2.51 | 2.64 | 4 | |
| 32 | 90522-028-000 WASHER, CHAIN CASE SETTING |
3.13 | 3.29 | 4 | |
| 33 | 90690-GHB-641 CLIP, CABLE (10MM) |
2.37 | 2.49 | 3 | |
| 34 | 90690-GHB-651 CLIP, CABLE (15MM) |
2.37 | 2.49 | 8 | |
| 35 | 90690-GHB-661 CLIP, CABLE (20MM) |
2.37 | 2.49 | 3 | |
| 36 | 90690-GHB-651 CLIP, CABLE (15MM) |
2.37 | 2.49 | 4 | |
| 37 | 94071-05080 NUT-WASHER (5MM) |
1.31 | 1.38 | 1 | |
| 38 | 94050-08080 NUT, FLANGE (8MM) |
0.93 | 0.98 | 1 | |
| 39 | 94050-10080 NUT, FLANGE (10MM) |
3.75 | 3.95 | 5 | |
| 41 | 95701-08016-08 BOLT, FLANGE (8X16) |
1.74 | 1.83 | 2 | |
| 42 | 95701-08018-08 BOLT, FLANGE (8X18) |
1.60 | 1.68 | 6 | |
| 43 | 95701-10055-08 BOLT, FLANGE (10X55) |
2.70 | 2.84 | 1 | |
| 44 | 95801-08080-08 BOLT, FLANGE (8X80) |
3.23 | 3.40 | 2 | |
| 45 | 95701-10025-08 BOLT, FLANGE (10X25) |
2.21 | 2.33 | 2 | |
| 46 | 95801-10040-08 BOLT, FLANGE (10X40) |
2.21 | 2.33 | 2 |
| Powered by HLSM |
| Copyright © 2026 HLSM, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed. For further information, contact HLSM, Inc. Version: 02/10/2026 |
